-
Petite Bordeaux walling
Versatile dry build wall capping
Petite Bordeaux Capping
Petite Bordeaux Capping is a versatile dry build wall capping product which is suitable for our dry build Burren Walling. It can be laid straight, curved or 90 degree angles.
Each unit is 300mm wide, units ‘A, B, C, and E have three sides textured with one side smooth and angled to give flexibility in producing curves. Unit ‘D’ has two sides textured and is rectangular in plan.
Colours Available
Limestone
Sandstone
When using Petite Bordeaux Capping for free standing applications it is recommended to use a proprietary masonry adhesive (for external use) or thin bed sand and cement mortar on the top layers.
Each unit height is 75mm.
LEARN - Roadstone online seminars
Masonry Essential Updates - Parts 1 + 2
Find out about the link between Building Regulations, Technical Guidance Documents, EN Product Standards and Irish Standard Recommendations.
Technical specification
Bale size:
20 linear meters per bale, made up of the following.
| Piece No. | Piece per bale | Block Height | Block Size | Block Size | Block Weight |
|---|---|---|---|---|---|
| A | 20 | 75 | 400/345 | 300 | 18.5 |
| B | 20 | 75 | 300/245 | 300 | 13.5 |
| C | 20 | 75 | 200/145 | 300 | 9 |
| D | 10 | 75 | 150/150 | 300 | 8 |
| E | 20 | 75 | 150/95 | 300 | 6 |
Typical construction layouts
Shown here is a layers of Petite Bordeaux Capping using all the pieces per layer. This layout is typical of what is required to build a wall in the stretcher bond configuration.
Circles and curves
The Petite Bordeaux Capping design makes it easy to construct a variety of curves. The minimum radius that can be built using the random pattern of units without cutting or using disproportionate amount of the smaller units is 1.8m. To build smaller radii use a larger proportion of smaller units, some cutting may be required.
90 Degree corners
Corners can be created with ease when using Petite Bordeaux Capping. The units are capable of being used in a 90-degree corner due to having textured faces with 90 degree angles (with the exception of unit D, which has only two sides textured).
Large units should be used at corners to achieve greater strength through overlap and interlock with units above and below.
Related products
