The Challenge

To provide an aesthetically pleasing, high end finished paving solution to comply with the Local Authority’s requirement for safe, welcoming and accessible pedestrian areas.

The Solution

Roadstone provided approx. 1,100m² of 60mm thick Verona silver granite paving with 140m² of Verona midnight paving border. There was also 100m² of Verona midnight Setts and 60 linear meters of Splayed mini kerb  used on the project.

Roadstone also supplied crushed aggregates for under the paving. This consisted of 510 tonnes of Clause 804 material and 105 tonnes of laying Grit. 3.5 tonnes of Kiln Dried Silver Jointing Sand in 25kg bags was also supplied as a paving jointing material.

All paving was supplied from Roadstone’s Gooig paving plant and the crushed aggregate from local quarries.

The Result

Verona paving offered a durable, high-end granite effect finish at a very competitive rate.

The specified requirement for safe, welcoming and accessible pedestrian areas, was achieved.

Roadstone’s technical team visited the site on 3 occasions to ensure that both the main contractor and the paving contractor were satisfied with the paving delivered.

Takeaways

Customers should always engage with the sales team in the early stages of a project to ensure that paving products are manufactured and delivered in good time and in the proper sequence.

It is advisable to choose silver jointing sand when placing a silver granite finished paviour (Verona, Milan or Settstone). This sand compliments the silver paving colour.